This manual explains the use, adjustment, and maintenance of your bicycle.
The information in this manual is separated by bicycle type. Bicycles of the same type may have slightly different equipment, so the illustrations might not exactly match your bicycle. Also, some bicycles of a given type include different equipment. If your bicycle has different equipment, or if the information for your bicycle type is unclear, choose a different bicycle type or consult your dealer. The following bicycle types are covered by this part of the online manual:
A bicycle that has a "drop" handlebar, multiple chain-driven gears, road caliper brakes, and 700c or 650c nominal wheel diameter with thin tires. Designed for Condition 1 riding as defined in the Conditions of Use.
Some bicycles are similar to Road bicycles, but with different features not covered here:
· Drop handlebar and direct-pull brakes is a Touring bicycle.
· Drop handlebar and a fixed-gear drivetain or one-speed freewheel (including belt-drive) is a Track bicycle.
· Drop bar with knobby tires and cantilever or disc brakes is a Cyclocross bicycle.
· Drop bar with smooth 'road' tires and disc brakes is an Urban road bicycle.
If your bicycle is not described here, or your bicycle has parts of a different type, select a different bicycle type.
Chapter 1 covers safety and bicycle care. Understanding and following the information in Chapter 1 will help you and your Trek bicycle avoid injury or damage.
Chapter 2 gives a maintenance schedule for your bicycle under normal riding conditions.
Chapter 3 gives basic instructions for inspection, lubrication, and adjustment of the parts of your bicycle.
Please note: If you intend to work on your own bicycle, read the Warning about mechanical work. If your new bicycle or frameset has a fork with a carbon steerer, read the required spacer and stem compatibility information.
Connect to the internet and register your bicycle on-line at the Trek web site. Registration is required before we can process a warranty claim. The serial number, which is required for you to register, is attached to the underside of the down tube (Figure 1).
Figure 1:
Serial number on underside of the down tube, by crankset
In this manual, we frequently use the names of frame parts and bicycle components. If you are not familiar with these terms, refer to the Names of Parts page before reading Chapter 1.
December 29, 2010